Tokas™

• Changing your Tokas™ Lenses

  Note: The lens with the SunGod engraving is the right lens (as you wear them). Fitting the lens into the incorrect side may lead to damage of your frame and will affect optical performance. To insert the lenses follow these steps…

  Step 1: Remove the lens by pushing the top edge of the lens out through the front of the frame. The lens will pop out. Repeat the same process with the second lens.

  Step 2: From the front of the frame, insert the top corner of the new lens into the outer corner of the frame nearest the hinge.

  Step 3: Holding the outer corner in place, push the top inner corner of the lens into the frame nearest the nose bridge.

  Step 4: Press and work around the bottom of the lens until it clicks into place and repeat this with the second lens. Remember, SunGod lenses are tough and can withstand the pressure required!

  Step 5: For optimum performance, use the provided microfibre pouch to clean fingerprints and marks from your lenses.

  Did we answer your question?

  Yes

  No
• Tokas™ Lens Kits

  You can find replacement Lens Kits for all SunGod products, including the Tokas™ here.

  Did we answer your question?

  Yes

  No