Ullrs™

• Changing your Ullrs™ Strap

  Step 1: To avoid damaging the inside of the Lens, always remove the Lens from the Frame before changing the strap.

  Step 2: From the outside, press the buckle of the Strap towards the inside of the Frame to release it.

  Step 3: Twist and thread the strap through the hole in the Frame. Repeat on the other side.

  Step 4: Identify the left side of the Strap by the marking on the inside of the buckle. Thread this through the left side (as you wear them) of the Frame.

  Step 5: Pull the Strap until you hear a click. Repeat on the other side.

  Did we answer your question?

  Yes

  No
• Changing your Ullrs™ Lens

  Step 1: Remove the Lens from the Frame by pulling away at the mid-point above the "SunGod" engraving and then from the bottom half of the frame. Warning: some lenses may have sharp edges, particularly around the lens clips. Handle with care.

  Step 2: Insert the new lens into one side first, securing at the attachment points at the top and bottom of the frame.

  Step 3: Insert the other side of the lens, again securing at the attachment points at the top and bottom of the frame.

  Step 4: Finally press the frame along the top and bottom and around the nose to ensure the lens is securely inserted.

  Step 5: Store your spare lens in the provided 100% recycled microfibre pouch.

  Did we answer your question?

  Yes

  No
• Ullrs™ Lens Kits

  You can find replacement Lens Kits for all SunGod products, including Ullrs™, here.

  Did we answer your question?

  Yes

  No